Fatigue & Fatigue crack growth

All Items

• A probabilistic fatigue crack growth life approach to the definition of inspection intervals for railway axles

  C. Mallor, S. Calvo, J.L. Nuñez, R. Rodriguez-Barrachina, A. Landaberea

  Subscription Access PDF Subscription Access Visual Abstract

  359-373

• Damage accumulation near the cold-expanded hole due to high-cycle fatigue by crack compliance method

  Sviatoslav Eleonsky, Yuri Matvienko , Vladimir Pisarev, Michael Zajtsev

  Subscription Access PDF Subscription Access Visual Abstract

  115-128

• Fatigue strength evaluation of PPGF35 by energy approach during mechanical tests

  Giacomo Risitano

  Subscription Access PDF Subscription Access Visual Abstract

  537-548

• Bending cyclic behavior and scatter-band analysis of aluminum alloys under beneficial and detrimental conditions through high-cycle fatigue regime

  Mohammad Azadi, Hanieh Aroo

  Subscription Access PDF Subscription Access Visual Abstract

  272-281

• Influence of themo-mechanical treatments and microstructural state on the fatigue behaviour of a weald seam: case of API X60 steel

  Mohammed Achoui , Fethi Sebaa, Benattou Bouchouicha

  Subscription Access PDF Subscription Access Visual Abstract

  365-375

• A new methodology to predict damage tolerance based on compliance via global-local analysis

  Gilberto Gomes, Thiago Oliveira, Alvaro Martins

  Subscription Access PDF Subscription Access Visual Abstract

  211-230

• Asymptotic response of friction stir welded joint under cyclic loading

  Imane Elmeguenni

  Subscription Access PDF Subscription Access Visual Abstract

  202-210

• Effect of nano-clay addition and heat-treatment on tensile and stress-controlled low-cycle fatigue behaviors of aluminum-silicon alloy: Effect of nano-clay addition and heat-treatment

  Mohammad Azadi, Adel Basiri, Ali Dadashi, G. Winter, B. Seisenbacher, F. Grün

  Subscription Access PDF Subscription Access Visual Abstract

  373-397

• Numerical modeling of the contact effect on the parameters of cracking in a 2D Fatigue Fretting Model

  Mohammed Bentahar, Habib Benzaama, Mahmoudi Noureddin

  Subscription Access PDF Subscription Access Visual Abstract

  182-194

• A brief review of fatigue design criteria on offshore wind turbine support structures

  Paulo Mendes, José A.F.O. Correia, Abílio M.P. De Jesus, Bianca Ávila, Hermes Carvalho, Filippo Berto

  Subscription Access PDF Subscription Access Visual Abstract

  302-315

• Influence of different loading paths on the multiaxial fatigue behavior of 2024 aluminum alloy under the same amplitude values of the second invariant of the stress deviator tensor

  Andrey Yankin, A.I. Mugatarov, V.E. Wildemann

  Subscription Access PDF Subscription Access Visual Abstract

  327-335

• Influence of stress ratio on residual stress evolution near cold-expanded hole due to low-cycle fatigue by crack compliance data

  Andrey Chernov, Sviatoslav Eleonsky, Vladimir Pisarev

  Subscription Access PDF Subscription Access Visual Abstract

  174-186

• Influence of contact parameters in fretting-fatigue contact 3D problems

  Fella Hamadouche, Habib Benzaama, Mohamed Mokhtari, Miloud Abbes Tahar

  Subscription Access PDF Subscription Access Visual Abstract

  228-240

• Mechanical performance of intelligent asphalt mixture utilizing rejuvenator encapsulated method

  Sari Sharif Ali, Mahyar Arabani, Hassan Latifi

  Subscription Access PDF Subscription Access Visual Abstract

  187-197

• Fatigue loading characteristic for the composite steel-concrete beams

  Ahmed I.Hassanin, Hesham M. Fawzy, Ahmed I. Elsheikh

  Subscription Access PDF Subscription Access Visual Abstract

  110-118

• Fatigue Behavior of Metallic Components Obtained by Topology Optimization for Additive Manufacturing

  F.K. Fiorentin, B. Oliveira, J.C.R. Pereira, J.A.F.O. Correia, Abilio M.P. de Jesus, F. Berto

  Subscription Access PDF Subscription Access Visual Abstract

  119-135

• Investigation of the effect of impact load on concrete-filled steel tube columns under fire

  Ali Golsoorat Pahlaviani, Ali Mohammad Rousta, Peyman Beiranvand

  Subscription Access PDF Subscription Access Visual Abstract

  317-324

• Numerical analysis of the influence of maximum residual thermal stresses on the intensity factor between the matrix and particle interfaces in metal matrix composite

  Taieb Nehari, Kaddour Bahram, Driss Nehari, Abdelfatah Marni Sandid

  Subscription Access PDF Subscription Access Visual Abstract

  275-281

• Bi-level Hybrid Uncertainty Quantification in Fatigue Analysis: S-N Curve Approach

  Raphael Basilio Pires Nonato

  Subscription Access PDF Subscription Access Visual Abstract

  88-103

• Effect of surface treatment on the fatigue strength of additive manufactured Ti6Al4V alloy

  Carlos Navarro Pintado, Jesús Vázquez, Jaime Domínguez, Antonio Periñán, Marta Herrera García, Fernando Lasagni, Simon Bernarding, Sebastian Slawik, Frank Mücklich, Francisco Boby, Lloyd Hackel

  Subscription Access PDF Subscription Access Visual Abstract

  337-344

• Improvement of Fatigue Properties of AZ31B Extruded Magnesium Alloy through Forging

  Andrew Gryguc, Sugrib Kumar Shaha, Seyed Behzad Behravesh, Hamid Jahed, Mary Wells, Bruce Williams

  Subscription Access PDF Subscription Access Visual Abstract

  152-165

• Fatigue Life Simulation and Analysis of Aluminum Alloy Sheet Self-piercing Riveting

  Qingchun Zheng, Naixin Wang, Peihao Zhu, Jingna Liu, Wenpeng Ma

  Subscription Access PDF Subscription Access Visual Abstract

  141-151

• Low cycle fatigue damage model and sensitivity analysis of fatigue crack initiation by finite element approach

  Zhiqiang Wang, Xiaoguang Huang, Dian-hao Zhang

  Subscription Access PDF Subscription Access Visual Abstract

  81-91

• Unified methodology for characterisation of global fatigue damage evolution in adhesively bonded joints

  Jaiswal Pankaj, Rahul Iyer Kumar, Wim De Waele

  Subscription Access PDF Subscription Access Visual Abstract

  26-37

• Crack growth rate prediction based on damage accumulation functions for creep-fatigue interaction

  Andrey Tumanov, V.N. Shlyannikov, A.P. Zakharov

  Subscription Access PDF Subscription Access Visual Abstract

  299-309

• A comparative study on the fatigue life of the vehicle body spot welds using different numerical techniques: Inertia relief and Modal dynamic analyses

  G.H. Farrahi, Alireza Ahmadi, Kazem Reza Kashyzadeh, Shahram Azadi, Kambiz Jahani

  Subscription Access PDF Subscription Access Visual Abstract

  67-81

• A Numerical framework for fatigue lifetime prediction of complex welded structures

  Kris Hectors, Wim De Waele, Mia Loccufier, Hans De Backer

  Subscription Access PDF Subscription Access Visual Abstract

  552-566

• Simulation of the delay effect after applying a simple overload on alloys of aluminum 2024T351 using the Willemborg model

  Kaddour Bahram, Mohamed Chaib, Abdelkader Slimene, Benattou Bouchouicha

  Subscription Access PDF Subscription Access Visual Abstract

  467-476

• Influence of static mean stresses on the fatigue behavior of 2024 aluminum alloy under multiaxial loading

  Andrey Yankin, Valerii Wildemann, Nikolai Belonogov, Oleg Staroverov

  Subscription Access PDF Subscription Access Visual Abstract

  151-163

• Experimental investigation of fatigue crack initiation from notch for 2024 T351 Al-alloy

  Mustapha Benachour, Nadjia Benachour, Mohamed Benguediab

  Subscription Access PDF Subscription Access Visual Abstract

  45-51

• Three approaches to evaluate of the heat dissipated during fatigue crack propagation experiments

  Alena Vedernikova, Anastasiia Iziumova, Aleksey Vshivkov, Oleg Plekhov

  Subscription Access PDF Subscription Access Visual Abstract

  1-8

• Crack growth study under thermo-mechanical loads: parametric analysis for 2024 T3 aluminum alloy

  Salmi abdallah, Mohamed Elajrami, Mohamed El-Amine Slimani

  Subscription Access PDF Subscription Access Visual Abstract

  231-241

• Crack growth based life prediction approach under LCF-HCF interaction

  Aritra Sarkar, M. Okazaki, A. Nagesha, R. Sandhya

  Subscription Access PDF Subscription Access Visual Abstract

  86-97

• Effect of yield stress on fatigue crack growth

  Fernando Ventura Antunes, Micael Frias Borges, Pedro Prates, Ricardo Branco, Marta Oliveira

  Subscription Access PDF Subscription Access Visual Abstract

  9-19

• The effect of fatigue crack rate on the heat dissipation in metals under mixed-mode loading

  Aleksei Vshivkov, Oleg Plekhov

  Subscription Access PDF Subscription Access Visual Abstract

  1-9

• Characterisation and Evaluation of the Mechanical Behaviour of Endodontic-grade NiTi Wires

  Samuel Pereira, André Rui Dantas Carvalho, Luís Reis, Manuel Freitas, Diogo Montalvão

  Subscription Access PDF Subscription Access Visual Abstract

  450-462

• Numerical model of fracture growth in hydraulic re-fracturing

  Oleg Yurievich Smetannikov, Yuriy Aleksandrovich Kashnikov, Sergey Gennadievich Ashikhmin, Artem Eduardovich Kukhtinskiy

  Subscription Access PDF Subscription Access Visual Abstract

  140-155

• Analysis of the Fatigue Damage Behavior of AW2099-T83 Al-Li Alloy under Strain-Controlled Fatigue

  Muhammed Jamiu Adinoyi, Nesar Merah, Prof., Jafar Albinmousa, Associate Prof

  Subscription Access PDF Subscription Access Visual Abstract

  487-506

• Structural Integrity Assessment of Weld for Joining Waveguide to Annular Linear Induction Pump Subjected to Vibration

  Ashish Kumar, Y.V. Nagaraja Bhat, B.K. Sreedhar, S.I. Sundar Raj, V. Prakash, P. Selvaraj

  Subscription Access PDF Subscription Access Visual Abstract

  515-525

• Specimen Level and Component Level Simulations of Fatigue Crack Growth Behavior under Cyclic Bending

  Suresh Kumar R, B N Rao, Velusamy K, Jalaldeen S

  Subscription Access PDF Subscription Access Visual Abstract

  526-535

• Effect of shape factor on structural reliability analysis of a surface cracked pipeline-parametric study

  Abdelkader Guillal, Noureddine Abdelbaki, Pr, Mohamed el Amine Bensghier, dr, Bogdan Kopei, Dr, Mourad Bettayeb, Dr

  Subscription Access PDF Subscription Access Visual Abstract

  341-349

• Verification of the ΔKeff hypothesis along the fatigue crack path in thin and thick Al specimens

  Julián Andrés Ortiz González, Jaime Tupiassú Pinho de Castro, Giancarlo Luis Gomez Gonzáles, Marco Antonio Meggiolaro, José Luiz de França Freire

  Subscription Access PDF Subscription Access Visual Abstract

  26-35

• Using DIC techniques to measure strain ranges inside the cyclic plastic zone ahead of a fatigue crack tip

  Giancarlo luis Gómez Gonzáles, Julián Andrés Ortiz González, Jaime Tupiassú Pinho de Castro, José Luiz de França Freire

  Subscription Access PDF Subscription Access Visual Abstract

  74-81

• Determination of Stress Intensity Factors and J integral based on Digital Image Correlation

  Eric Breitbarth, Tobias Strohmann, Michael Besel, Stefan Reh

  Subscription Access PDF Subscription Access Visual Abstract

  12-25

• Fatigue reliability assessment of small sample excavator working devices based on Bootstrap method

  Yuhong Shao, Pengmin Lu, Binhua Wang, Qingyi Xiang

  Subscription Access PDF Subscription Access Visual Abstract

  757-767

• Fatigue crack growth in notched specimens: a numerical analysis: Fatigue crack growth in notched specimens

  Fernando Ventura Antunes, Ricardo Branco, Pedro Prates, José Domingos Costa

  Subscription Access PDF Subscription Access Visual Abstract

  666-675

• Multi-axial fatigue numerical crack propagation in cruciform specimens

  Venanzio Giannella, Michele Perrella

  Subscription Access PDF Subscription Access Visuall Abstract

  639-647

• Stress Intensity Factor Equations for the Evolution of Surface and Corner Cracks to Through Cracks

  Antonio Miranda, Rafael Marques, Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro

  Subscription Access PDF Subscription Access Visual Abstract

  611-629

• Evaluation of Fatigue Properties under Four-point Bending and Fatigue Crack Propagation in Austenitic Stainless Steel with a Bimodal Harmonic Structure

  Shoichi Kikuchi, Yuta Nakatsuka, Yoshikazu Nakai, Masashi Nakatani, Mie Ota Kawabata, Kei Ameyama

  Subscription Access PDF Subscription Access Visual Abstract

  545-553

• Experimental investigation of surface roughness effect on fatigue performance of AISI 1045 carbon steel and fatigue limit prediction

  Khadija Kimakh, Abdelkerim Chouaf, Amal Saoud, El Hassan Mallil, Samir Aghzer

  Subscription Access PDF Subscription Access Visual Abstract

  429-441