Low Cycle Fatigue

All Items

• Quantitative description of low-cycle fatigue damage accumulation in contact interaction zone by local strain evolution

  Sviatoslav Eleonsky, Yury Matvienko, Vladimir Pisarev, Igor Odintsev

  Requires Subscription PDF Requires Subscription Visual Abstract

  541-560

• Influence of additional static stresses on biaxial low-cycle fatigue of 2024 aluminum alloy

  Andrey Yankin, Anastasia Lykova, Artur Mugatarov, Valeriy Wildemann, Artem Ilinykh

  Requires Subscription PDF Requires Subscription Visual Abstract

  180-193

• Investigation fatigue crack initiation and propagation cruciform welded joints by extended finite element method (XFEM) and implementation SED approach

  Hamza Djeloud, Mustafa Moussaoui, Ahmed Kellai, Dahmane Hachi, Filippo Berto, Benattou Bouchouicha, Brahim Elkhalil Hachi

  Requires Subscription PDF Requires Subscription Visual Abstract

  346-362

• Effect of nano-clay addition and heat-treatment on tensile and stress-controlled low-cycle fatigue behaviors of aluminum-silicon alloy

  Mohammad Azadi, Adel Basiri, Ali Dadashi, G. Winter, B. Seisenbacher, F. Grün

  Requires Subscription PDF Requires Subscription Visual Abstract

  373-397

• A brief review of fatigue design criteria on offshore wind turbine support structures

  Paulo Mendes, José A.F.O. Correia, Abílio M.P. De Jesus, Bianca Ávila, Hermes Carvalho, Filippo Berto

  Requires Subscription PDF Requires Subscription Visual Abstract

  302-315

• Numerical analysis and thermal fatigue life prediction of solder layer in a SiC-IGBT power module

  Dianhao Zhang, Xiao-guang Huang, Bin-liang Cheng, Neng Zhang

  Requires Subscription PDF Requires Subscription Visual Abstract

  316-326

• Influence of contact parameters in fretting-fatigue contact 3D problems

  Fella Hamadouche, Habib Benzaama, Mohamed Mokhtari, Miloud Abbes Tahar

  Requires Subscription PDF Requires Subscription Visual Abstract

  228-240

• Improvement of Fatigue Properties of AZ31B Extruded Magnesium Alloy through Forging

  Andrew Gryguc, Sugrib Kumar Shaha, Seyed Behzad Behravesh, Hamid Jahed, Mary Wells, Bruce Williams

  Requires Subscription PDF Requires Subscription Visual Abstract

  152-165

• Crack growth rate prediction based on damage accumulation functions for creep-fatigue interaction

  Andrey Tumanov, V.N. Shlyannikov, A.P. Zakharov

  Requires Subscription PDF Requires Subscription Visual Abstract

  299-309

• Comparison of the mechanical response of B400c and B450c dual phase steel bar categories, in long terms

  Charis Apostolopoulos, Argyro Drakakaki, Alkiviadis Apostolopoulos, Konstantinos Koulouris

  Requires Subscription PDF Requires Subscription Visual Abstract

  548-559

• The effect of temperature on low-cycle fatigue of shape memory alloy

  Volodymyr Iasnii, Petro Yasniy, Denys Baran, Anna Rudawska

  Requires Subscription PDF Requires Subscription Visual Abstract

  310-318

• Crack growth based life prediction approach under LCF-HCF interaction

  Aritra Sarkar, M. Okazaki, A. Nagesha, R. Sandhya

  Requires Subscription PDF Requires Subscription Visual Abstract

  86-97

• Tension - torsion fatigue tests on the proton exchange membrane Nafion 115 (Perfluorosulfonic acid)

  Gonzalo Mariano DOMINGUEZ ALMARAZ, Luis M. TORRES DUARTE, Christian J. TORRES PACHECO

  Requires Subscription PDF Requires Subscription Visual Abstract

  360-369

• Low cycle fatigue and creep-fatigue response of the 316Ti stainless steel

  S C S P Kumar Krovvidi, Sunil Goyal, A K Bhaduri

  Requires Subscription PDF Requires Subscription Visual Abstract

  577-584

• Low cycle fatigue behavior of additively manufactured Ti-6Al-4V under non-proportional and proportional loading

  Stefano Bressan, Fumio Ogawa, Takamoto Itoh, Filippo Berto

  Requires Subscription PDF Requires Subscription Visual Abstract

  18-25

• Fracture of elastic-brittle and elastic-plastic material in cantilever cyclic bending

  Andrzej Kurek, Tadeusz Lagoda

  Requires Subscription PDF Requires Subscription Visual Abstract

  42-49

• Joined application of a multiaxial critical plane criterion and a strain energy density criterion in low-cycle fatigue

  Andrea Carpinteri, Giovanni Fortese, Camilla Ronchei, Daniela Scorza, Sabrina Vantadori, Filippo Berto

  Requires Subscription PDF

  Pages 66-70

• Cracking directions in multiaxial low cycle fatigue at high and room temperatures

  Masao Sakane, Takamoto Itoh

  Requires Subscription PDF

  Pages 16-23

• Computational simulation of biaxial fatigue behaviour of lotus-type porous material

  J. Kramberger, M. Sori, M. Sraml, S. Glodez

  Requires Subscription PDF

  153-159

• Plastic flow equations for the local strain approach in the multiaxial case

  C. Madrigal, A. Navarro, C. Vallellano

  Requires Subscription PDF

  8-14

• Damage and failure modeling of lotus-type porous material subjected to low-cycle fatigue

  J. Kramberger, K. Sterkuš, S. Glodež

  Requires Subscription PDF

  pages 142-151

• Crack mode and life of Ti-6Al-4V under multiaxial low cycle fatigue

  Takamoto Itoh, Masao Sakane, Takahiro Morishita, Hiroshi Nakamura, Masahiro Takanashi

  Requires Subscription PDF

• Evaluation and visualization of multiaxial stress and strain states under non-proportional loading

  T. Itoh, M. Sakane, T. Morishita

  Requires Subscription PDF Requires Subscription Audio Slides

  pages 289-301

• Numerical implementation of a multiaxial cyclic plasticity model for the Local Strain Method in low cycle fatigue

  C. Madrigal, V. Chaves, A. Navarro

  Requires Subscription PDF

  pages 153-161

• Modification of creep and low cycle fatigue behaviour induced by welding

  A. Carofalo, V. Dattoma, R. Nobile, F.W. Panella, G. Alfeo, A. Scialpi, G.P. Zanon

  Requires Subscription PDF

  pages 349-359