F.V. Antunes R. Branco L. Correia AL Ramalho


Crack closure concept has been widely used to explain different issues of fatigue crack propagation. However, different authors have questioned the relevance of crack closure and have proposed alternative concepts. The main objective here is to check the effectiveness of crack closure concept by linking the contact of crack flanks with non-linear crack tip parameters. Accordingly, 3D-FE numerical models with and without contact were developed for a wide range of loading scenarios and the crack tip parameters usually linked to fatigue crack growth, namely range of cyclic plastic strain, crack tip opening displacement, size of reversed plastic zone and total plastic dissipation per cycle, were investigated. It was demonstrated that: i) LEFM concepts are applicable to the problem under study; ii) the crack closure phenomenon has a great influence on crack tip parameters decreasing their values; iii) the ?Keff concept is able to explain the variations of crack tip parameters produced by the contact of crack flanks; iv) the analysis of remote compliance is the best numerical parameter to quantify the crack opening level; v) without contact there is no effect of stress ratio on crack tip parameters. Therefore it is proved that the crack closure concept is valid.


  1. Latest Oldest Top Comments


    Download data is not yet available.



    How to Cite

    Antunes, F., Branco, R., Correia, L., & Ramalho, A. (2015). A numerical study of non-linear crack tip parameters. Frattura Ed Integrità Strutturale, 9(33), pages 199–208. https://doi.org/10.3221/IGF-ESIS.33.25

    Similar Articles

    1 2 3 4 5 6 7 8 9 10 > >> 

    You may also start an advanced similarity search for this article.