Linear and Nonlinear Fracture Mechanics

202 Items

All Items

3D Stress intensity factor and T-stresses (T11 and T33) formulations for a Compact Tension specimen

S. K. Kudari, K. G. Kodancha

Subscription Access PDF
Pages 216-225
Experimental investigation on fracture toughness of Al6061–graphite by using Circumferential Notched Tensile Specimens

Saleemsab Doddamani, Mohamed Kaleemulla

Subscription Access PDF
Pages 274-281
On the stress investigation at the edges of the fixed elastic semi-strip

N. Vaysfeld, O. Kryvyi, Z. Zhuravlova

Subscription Access PDF
Pages 1-11
A unified rule to estimate multiaxial elastoplastic notch stresses and strains under in-phase proportional loadings

Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Luiz Fernando Martha, Luiz Fernando Nazaré Marques

Subscription Access PDF
Pages 128-134
Ductile fracture modelling and J-Q fracture mechanics: a constraint based fracture assessment approach

N.O. Larrosa, R.A. Ainsworth

Subscription Access PDF
Pages 266-272
Pressure vessels design methods using the codes, fracture mechanics and multiaxial fatigue

Fatima Majid, Jilali Nattaj, Mohamed Elghorba

Subscription Access PDF
Pages 273-280
Numerical simulation of early-age shrinkage effects on RC member deflections and cracking development

P. Bernardi, R. Cerioni, E. Michelini, A. Sirico

Subscription Access PDF
15-21
Two-parameter fracture model for cortical bone

Sabrina Vantadori, Andrea Carpinteri, Giovanni Fortese, Camilla Ronchei, Daniela Scorza, Filippo Berto

Subscription Access PDF
215-220
Modeling of edge cracks interaction

V. Petrova, S. Schmauder, A. Shashkin

Subscription Access PDF
Pages 8-26
Multiple crack propagation by DBEM in a riveted butt-joint: a simplified bidimensional approach

R. Citarella

Subscription Access PDF
Pages 160-167
Numerical study of crack path by MMCG specimen using M integral

S. El Kabir, R. Moutou Pitti, N. Recho, Y. Lapusta, F. Dubois

Subscription Access PDF
pages 64-73
Multiple and non-planar crack propagation analyses in thin structures using FCPAS

H. Dündar, A. O. Ayhan

Subscription Access PDF
pages 360-367
Crack path simulation for cylindrical contact under fretting conditions

R.A. Cardoso, J.A. Araújo, J.L.A. Ferreira, F.C. Castro

Subscription Access PDF
pages 405-413
Crack simulation models in variable amplitude loading - a review

Luiz Carlos H. Ricardo, Carlos Alexandre J. Miranda

Subscription Access PDF
pages 456-471
Damage of bamboo and wooden materials based on linear elastic fracture mechanics in garden design

Tang Haiyan

Subscription Access PDF
pages 472-480
Influence of different sizes of concrete and roller compacted concrete on double-K fracture parameters

Liu Chunjiang, Zhang Huabo, Lv Ninghua

Subscription Access PDF
pages 500-508
Short review: Potential impact of delamination cracks on fracture toughness of structural materials

X.C. Arnoult, M. Ružicková, K. Kunzová, A. Materna

Subscription Access PDF
pages 509-522
Residual strength evaluation by DBEM for a cracked lap joint

R. Citarella

Subscription Access PDF
pages 523-533
Crack initiation and propagation on the polymeric material ABS (Acrylonitrile Butadiene Styrene), under ultrasonic fatigue testing

G. M. Domínguez Almaraz, E. Correa Gómez, J.C. Verduzco Juárez, J.L. Avila Ambriz

Subscription Access PDF
DBEM crack propagation for nonlinear fracture problems

R. Citarella, V. Giannella, M. Lepore

Subscription Access PDF
Local approaches for the fracture assessment of notched components: the research work developed by Professor Paolo Lazzarin

F. Berto

Subscription Access PDF
Fracture morphology and its evolution A review on crack path stability and brittle fracture along butt-weld

Y. Sumi

Subscription Access PDF
Crack paths and the linear elastic analysis of cracked bodies

L. P. Pook

Subscription Access PDF
Effect of segregations on mechanical properties and crack propagation in spring steel

B. Žužek, M. Sedlacek, B. Podgornik

Subscription Access PDF
Crack initiation at V-notch tip subjected to in-plane mixed mode loading: An application of the fictitious notch rounding concept

F. Berto

Subscription Access PDF
High temperature fatigue tests and crack growth in 40CrMoV13.9 notched components

P. Gallo, F. Berto

Subscription Access PDF
Three-dimensional effects on cracked discs and plates under nominal Mode III loading

A. Campagnolo, F. Berto, L. P. Pook

Subscription Access PDF
Crack path predictions and experiments in plane structures considering anisotropic properties and material interfaces

P.O. Judt, A. Ricoeur

Subscription Access PDF
The concept of the average stress in the fracture process zone for the search of the crack path

Yu.G. Matvienko, M.M. Semenova

Subscription Access PDF
Fatigue crack propagation in short-fiber reinforced plastics

K. Tanaka, K. Oharada, D. Yamada, K. Shimizu

Subscription Access PDF
Effect of defect length on rolling contact fatigue crack propagation in high strength steel

T. Makino, Y. Neishi, D. Shiozawa, Y. Neishi, D. Shiozawa, S. Kikuchi, S. Okada, K. Kajiwara, Y. Nakai

Subscription Access PDF
Graphene as a model system for 2D fracture behavior of perfect and defective solids

P. Hess

Subscription Access PDF
Influence of control parameters on the crack paths in the aluminum alloy 2024 under bending

E. Marcisz, D. Rozumek, Z. Marciniak

Subscription Access PDF
Growth behavior of fatigue cracks in ultrafine grained Cu smooth specimens with a small hole

Masahiro Goto, Kakeru Morita, Junichi Kitamura, Takaei Yamamoto, Masataka Baba, Seung-zeon Han, Sangshik Kim

Subscription Access PDF
Effect of centrifugal load on crack path in thin-rimmed and webbed gears

F. Curà, A. Mura, C. Rosso

Subscription Access PDF
Weight Function Method for computations of crack face displacements and stress intensity factors of center cracks

Junling Fan, Dengke Dong, Li Chen, Xianmin Chen, Xinglin Guo

Subscription Access PDF
pages 463-470
Three-dimensional effects on cracked components under anti-plane loading

F. Berto, A. Campagnolo

Subscription Access PDF
pages 17-24
Estimation of the crack propagation direction in a mixed-mode geometry via multi-parameter fracture criteria

L. Malíková, V. Veselý, S. Seitl

Subscription Access PDF
pages 25-32
Some relationships between the peak stresses and the local strain energy density for cracks subjected to mixed-mode (I+II) loading

G. Meneghetti, A. Campagnolo, F. Berto

Subscription Access PDF
pages 33-41
Fretting in complete contacts - the use of Williams’ solution

D. A. Hills, R. Flicek

Subscription Access PDF
pages 61-66
Specimen thickness effect on elastic-plastic constraint parameter A

G.P. Nikishkov, Yu.G. Matvienko

Subscription Access PDF
pages 73-79
Multi-parameter approximation of stress field in a cracked specimen using purpose-built Java applications

V. Veselý, J. Sobek, D. Tesa?, P. Frantík, T. Pail, S. Seitl

Subscription Access PDF
pages 120-133
Some experimental observations of crack-tip mechanics with displacement data

M. Mokhtari, P. Lopez-Crespo, B. Moreno, M. Zanganeh

Subscription Access PDF
pages 143-150
2D mapping of plane stress crack-tip fields following an overload

P. J. Withers, P. Lopez-Crespo, M. Mostafavi, A. Steuwer, J. F. Kelleher, T. Buslaps

Subscription Access PDF
pages 151-158
Growth of inclined fatigue cracks using the biaxial CJP model

G. Laboviciute, C. J. Christopher, M. N. James, E. A. Patterson

Subscription Access PDF
pages 167-173
Effective stress assessment at rectangular rounded lateral notches

Enrico Maggiolini, Roberto Tovo, Paolo Livieri

Subscription Access PDF
pages 183-190
A numerical study of non-linear crack tip parameters

F.V. Antunes, R. Branco, L. Correia, AL Ramalho

Subscription Access PDF
pages 199-208
Crack tip fields and mixed mode fracture behaviour of progressively drawn pearlitic steel

J. Toribio, B. González, J.C. Matos

Subscription Access PDF
pages 221-228
A critical review of fracture mechanics as a tool for multiaxial fatigue life prediction of plastics

Anders Winkler, Gertjan Kloosterman

Subscription Access PDF
pages 262-288
Surface crack growth in cylindrical hollow specimen subject to tension and torsion

V. Shlyannikov, R. Yarullin, I. Ishtyryakov

Subscription Access PDF
pages 335-344

Previous 101-150 of 202 Next