Ultrasonic welding of lap joints of PEI plates with PEI/CF-fabric prepregs
##plugins.themes.bootstrap3.article.sidebar##
##plugins.themes.bootstrap3.article.main##
https://orcid.org/0000-0003-4375-9132
Defang Tian
National Research Tomsk Polytechnic University, Tomsk, Russia
Sergey Panin
Institute of Strength Physics and Materials Science SB RAS, Tomsk, Russia
https://orcid.org/0000-0001-7623-7360
Svetlana Bochkareva
Institute of Strength Physics and Materials Science SB RAS, Tomsk, Russia
https://orcid.org/0000-0003-4889-6128
Iliya Panov
National Research Tomsk State University, Tomsk, Russia
Abstract
In this study, ultrasonic welding (USW) of lap joints of polyetherimide (PEI) plates (adherends) with carbon fiber (CF) prepregs impregnated with PEI was investigated. No energy director (ED) was used, so binder contents were varied in the prepregs to compensate for the lack of the polymer in the fusion zone. In addition, the effect of the USW parameters on the structure and the mechanical properties of the lap-joints were analyzed. The most homogeneous macrostructure, the maintained structural integrity of both the CF-fabric in the prepregs and the lap-joined PEI adherends, as well as the maximum strength properties (tensile strength) were revealed for the USW joints with the minimum polymer content in the prepreg. In this case, rising the USW time from 400 up to 800 ms radically changed the macrostructure of the fusion zone, while the strength properties did not vary significantly (shear stresses were 42–48 MPa). Computer simulation of the influence of the PEI/CF-fabric ratios in the prepregs on the deformation response of the USW joints showed that the prepreg thicknesses and, accordingly, the PEI/CF ratios did not exert a noticeable effect on the strain–stress (tensile) diagrams, while the determining factor was the adhesion level.
##plugins.themes.bootstrap3.article.details##
How to Cite
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright
Authors are allowed to retain both the copyright and the publishing rights of their articles without restrictions.
Open Access Statement
Fracture and Structural Integrity (F&SI) is an open-access journal which means that all content is freely available without charge to the user or his/her institution. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author. This is in accordance with the DOAI definition of open access.
F&SI operates under the Creative Commons Licence Attribution 4.0 International (CC-BY 4.0). This allows to copy and redistribute the material in any medium or format, to remix, transform and build upon the material for any purpose, even commercially, but giving appropriate credit, providing a link to the license, and indicating if changes were made.