SI: “Multiaxial Fatigue” and “Crack Tip Fields”
Guest editors
• Franck Morel (Arts et Metiers ParisTech, France )
• Thierry Palin-Luc (Arts et Metiers ParisTech, France)
• Neil James (University of Plymouth, UK)
• Youshi Hong (Chinese Academy of Sciences, China)
• Luca Susmel (University of Sheffield, UK)
• Nicolas Saintier (Arts et Metiers ParisTech, France)
• Sylvie Pommier (ENS Paris-Saclay, University Paris Saclay, France)
A two-step multiaxial racetrack filter algorithm for non-proportional load histories
Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Hao Wu
Crack initiation life in notched Ti-6Al-4V titanium bars under uniaxial and multiaxial fatigue: synthesis based on the averaged strain energy density approach
Giovanni Meneghetti, Alberto Campagnolo, Filippo Berto, Keisuke Tanaka
Cracking directions in multiaxial low cycle fatigue at high and room temperatures
Masao Sakane, Takamoto Itoh
Determination of the critical plane orientation depending on the fatigue curves for bending and torsion
Marta Kurek, Tadeusz Lagoda
Effect of different environmental conditions on surface crack growth in aluminum alloys
V. Shlyannikov, R. Yarullin, I. Ishtyryakov
Effect of spectral cross-correlation on multiaxial fatigue damage: simulations using the critical plane approach
Andrea Carpinteri, Andrea Spagnoli, Sabrina Vantadori
Evaluation and visualization of multiaxial fatigue behavior under random non-proportional loading condition
Takahiro Morishita, Fumio Ogawa, Takamoto Itoh
Evaluation of new multiaxial damage parameters on low carbon steel
A. S. Cruces, P. Lopez-Crespo, B. Moreno, A. Lopez-Moreno, S. Suman
Influence of crack micro-roughness on the plasticity-induced fatigue propagation in high strength steel
J. Toribio, J.C. Matos, B. González
Joined application of a multiaxial critical plane criterion and a strain energy density criterion in low-cycle fatigue
Andrea Carpinteri, Giovanni Fortese, Camilla Ronchei, Daniela Scorza, Sabrina Vantadori, Filippo Berto
Multiaxial fatigue property of type 316 stainless steel using hollow cylinder specimen under combined pull loading and inner pressure
Takahiro Morishita, Yuta Takada, Takamoto Itoh
Multiaxial fatigue strength of titanium alloys
Filippo Berto, Alberto Campagnolo, Torgeir Welo, Sabrina Vantadori, Andrea Carpinteri
Notched multiaxial fatigue of Al7050-T7451: on the need for an equivalent process zone size
M.V.C Sá, J.L.A Ferreira, C.R.M da Silva, J.A. Araújo
On the applicability of Miner’s rule for multiaxial fatigue life calculations under non-proportional load histories
Marco Antonio Meggiolaro, Jaime Tupiassú Pinho de Castro, Samuel Elias Ferreira, Hao Wu
Prediction of fatigue crack initiation under biaxial loading
J.V. Sahadi, D. Nowell, R.J.H. Paynter
Sharp three-dimensional notches under combined nominal normal and shear fatigue loading
M. Vormwald, E. Shams
Simple criterion for predicting fatigue life under combined bending and torsion loading
K. Slámecka, J. Pokluda
A model to quantify fatigue crack growth by cyclic damage accumulation calculated by strip-yield procedures
Samuel Elias Ferreira, Jaime Tupiassú Pinho de Castro, Marco Antonio Meggiolaro
Crack tip field in circumferentially-cracked round bar (CCRB) in tension affected by loss of axial symmetry
J. Toribio, B. González, J.C. Matos
Crack tip strain evolution and crack closure during overload of a growing fatigue crack
De-Qiang Wang, Ming-Liang Zhu, Fu-Zhen Xuan
Effect of numerical parameters on plastic CTOD
F.V. Antunes, R. Simoes, R. Branco, P. Prates
Experimental evaluation of CTOD in constant amplitude fatigue crack growth from crack tip displacement fields
J.M. Vasco-Olmo, F.A. Diaz, F.V. Antunes, M.N. James
Experimental methodology for the quantification of crack tip plastic zone and shape from the analysis of displacement fields
J.M. Vasco-Olmo, F.A. Diaz, M.N. James, C.J. Christopher, E.A. Patterson
Fracture toughness of rough and frictional cracks emanating from a re-entrant corner
Andrea Carpinteri, Andrea Spagnoli, Michele Terzano, Sabrina Vantadori
Impact of specific fracture energy investigated in front of the crack tip of three-point bending specimen
J. Klon, J. Sobek, L. Malíkova, S. Seitl
Influence of forging conditions on the fatigue mechanisms of low alloy steels: a 3D study
Pablo Lorenzino, Jean-Yves Buffiere, Catherine Verdu
Measurement and analysis of fatigue crack deformation at the micro-scale
D. Nowell, K.I. Dragnevski, S.J. O’Connor
Mid-thickness studies of the stress intensity factor in the bulk of bainitic steel
P. Lopez-Crespo, J. Vazquez-Peralta, C. Simpson, T. Buslaps, P. J. Withers
Modelling of interfacial transition zone effect on resistance to crack propagation in fine-grained cement-based composites
H. Simonova, M. Vyhlidal, B. Kucharczykova, P. Bayer, Z. Kersner, L. Malikova, J. Klusak
Gradient approach for the evaluation of the fatigue limit of welded structures under complex loading
Y. Nadot, D. Halm, F. Dal Cero Coelho
On DIC measurements of DeltaKeff to verify if it is the FCG driving force
Julián Andrés Ortiz González, Jaime Tupiassú Pinho de Castro, Giancarlo Luis Gomez Gonzáles, Marco Antonio Meggiolaro, José Luiz de França Freire
On short cracks that depart from elastoplastic notch tips
Verônica Miquelin Machado, Jaime Tupiassú Pinho de Castro, Marco Antonio Meggiolaro
On the connection between mode II and mode III effective thresholds in metals
Tomas Vojtek, Stanislav Zak, Jaroslav Pokluda
On the use of length scale parameters to assess the static strength of notched 3D-printed PLA
Adnan A. Ahmed, Luca Susmel
Review of the Influence of non-singular higher order terms on the stress field of thin welded lap joints and small inclined cracks in plates
F. Berto, M.R. Ayatollahi, S. Vantadori, A. Carpinteri
Stress Intensity Factor calculation from displacement fields
S. Beretta, L. Patriarca, S. Rabbolini
Study of strain localizations in a polycrystalline medium in presence of a quasi-static crack
L. Patriarca, P.G. Luccarelli, S. Foletti
The effect of creep damage formulation on crack tip fields, creep stress intensity factor and crack growth assessments
V. Shlyannikov, A. Tumanov
The effect of residual stress on the nonsingular T-stresses
A.S. Chernyatin, Yu.G. Matvienko, I.A. Razumovsky
The heat energy dissipated in a control volume to correlate the crack propagation rate in stainless steel specimens
G. Meneghetti, M. Ricotta
The influence of crack tip shielding on fatigue crack propagation
Anghel Cernescu
Variable mode-mixity during fatigue cycles – crack tip parameters determined from displacement fields measured by digital image correlation
Michael Vormwald, Yigiter Hos, José L.F. Freire, Giancarlo L.G. Gonzáles, Jorge G. Díaz
Williams expansion-based approximation of the stress field in an Al 2024 body with a crack from optical measurements
S. Seitl, L. Malíkova, J. Sobek, P. Frantík, P. Lopez-Crespo