SI: IGF27 - 27th International Conference on Fracture and Structural Integrity

Guest Editors:
• Sabrina Vantadori (Università di Parma, Italy)
• Daniela Scorza (Università di Parma, Italy)
• Enrico Salvati (Università di Udine, Italy)
• Giulia Morettini (Università di Perugia, Italy)
• Costanzo Bellini (Università di Cassino e del Lazio Meridionale, Italy)

Issue 69 (July 2024)

Titanium/FRP hybrid sandwich: in-plane flexural behaviour of short beam specimens
Costanzo Bellini, Rosario Borrelli, Vittorio Di Cocco, Stefania Franchitti, Francesco Iacoviello, Larisa Patricia Mocanu, Luca Sorrentino

Experimental investigation on the fatigue and fracture properties of a fine pearlitic rail steel
Davide Leonetti, Bart Schotsman

Issue 68 (April 2024)

Degradation analysis of dynamic properties for plain concrete structures under mixed-mode fracture conditions via an improved cohesive crack approach
Umberto De Maio, Daniele Gaetano, Fabrizio Greco, Raimondo Luciano, Andrea Pranno

On the stress- and strain-based fatigue behavior of welded thick-walled nodular cast iron
Christoph Bleicher, Steffen Schoenborn, Heinz Kaufmann, Masoud Alizadeh-Sh

Modelling of crack propagation in miniaturized and normal SENB specimens based on local failure criterion
Bernadett Spisak, Zoltán Bézi, Réka Erdei, Szabolcs Szávai

Numerical Cohesive Zone Modeling (CZM) of Self-Anchoring AM Metal-CFRP joints
Fikret Enes Altunok , Giorgio De Pasquale

Revisiting classical concepts of Linear Elastic Fracture Mechanics - Part II: Stretching finite strips weakened by single edge parabolically-shaped notches
Christos F. Markides, Stavros K Kourkoulis

Issue 67 (January 2024)

A nonlocal elasticity theory to model the static behaviour of edge-cracked nanobeams
Daniela Scorza, Andrea Carpinteri, Camilla Ronchei, Andrea Zanichelli, Raimondo Luciano, Sabrina Vantadori

Fatigue assessment of a FSAE car rear upright by a closed form solution of the critical plane method
Andrea Chiocca, Michele Sgamma, Francesco Frendo, Francesco Bucchi, Giuseppe Marulo

Damage-failure transition in titanium alloy Ti-6Al-4V under dwell fatigue loads
Vladimir Oborin, Aleksandr Balakhnin, Oleg Naimark, Yuri Gornostyrev, Vladimir Pushin, Nataliya Kuranova, Dimitrii Rasposienko, Aleksey Svirid, Aleksey Uksusnikov

Impact of earthquake’s epicenter distance to failure of the embankment – A seismic prediction
Abdoullah Namdar, Omer Mughieda, Ts Haji Azahar Bin Mohd Yasin, Falak Azhar

Study of defects influence on chlorinated polyvinyl chloride pipes damage and analysis of their fracture
Fatima Gugouch, M. Meknassi, M. Elghorba, A. Wahid, H. Mouradi, H. Bouhssis, A. Maziri

Issue 66 (October 2023)

Revisiting classical concepts of Linear Elastic Fracture Mechanics - Part I: The closing ‘mathematical’ crack in an infinite plate and the respective Stress Intensity Factors
Christos Markides, Stavros K Kourkoulis

Issue 65 (July 2023)

High carbon steel/Inconel 718 bimetallic parts produced via Fused Filament Fabrication and Sintering
Paolo Ferro, Alberto Fabrizi, Franco Bonollo, H.S.A. Elsayed, Filippo Berto, Gianpaolo Savio