SI: Fracture Mechanics in Central and East Europe
Guest Editors:
• L. Marsavina (University of Timisoara, Romania)
• A. Sedmak (University of Belgrade, Serbia)
• D. Angelova (University of Chemical Technology and Metallurgy, Sofia, Bulgaria)
On fatigue behavior of two spring steels. Part I: Wöhler curves and fractured surfaces
D. Angelova, R. Yordanova, T. Lazarova, S. Yankova
On fatigue behaviour of two spring steels. Part II: Mathematical models
D. Angelova, R. Yordanova, T. Lazarova, S. Yankova
On monitoring of mechanical characteristics of hot rolled S355J2 steel
D. Angelova, R. Yordanova, A. Georgiev, S. Yankova
Novel magnetic composites based on water soluble unsaturated polyester resin and iron oxide nanoparticles
Petar Velev, Rayna Bryaskova
Recast layers on high speed steel surface after electrical discharge treatment in electrolyte
D. Krastev, V. Paunov, B. Yordanov
Quality Control system for a hot-rolled metal surface
I. Mazur, T. Koinov
An effect of heat insulation parameters on thermal losses of water-cooled roofs for secondary steelmaking electric arc furnaces
E. Mihailov, P. Popgeorgiev, M. Ivanova
Simulation of accelerated strip cooling on the hot rolling mill run-out roller table
U. Muhin, S. Belskij, E. Makarov, T. Koynov
Application of between- stand cooling in the production hot – rolled strips
U. Muhin, S. Belskij, E. Makarov, T. Koynov
Study of the influence between the strength of antibending of working rolls on the widening during hot rolling of thin sheet metal
U. Muhin, S. Belskij, T. Koynov
Influence of temperature and exploitation period on fatigue crack growth parameters in different regions of welded joints
Ivica Camagic, Nemanja Vasic, Bogdan Cirkovic, Zijah Burzic, Aleksandar Sedmak, Aleksandar Radovic
Modeling of edge cracks interaction
V. Petrova, S. Schmauder, A. Shashkin
Experimental examination of fatigue life of welded joint with stress concentration
Miodrag Arsic, Zoran Savic, Aleksandar Sedmak, Srdjan Bosnjak, Simon Sedmak
Numerical simulation of dissimilar metal welding and its verification for determination of residual stresses
Sz. Szávai, Z. Bezi, C. Ohms
Fatigue life prediction of casing welded pipes by using the extended finite element method
Ljubica Lazic, Vulicevic, Aleksandar Rajic, Aleksandar Grbovic, Aleksandar Sedmak, Živce Šarkocevic
Scaling of compression strength in disordered solids: metallic foams
J. Kovácik, J. Jerz, N. Mináriková, L. Marsavina, E. Linul
Integrity and life estimation of turbine runner cover in a hydro power plant
A. Sedmak, S. Bosnjak, M. Arsic, S.A. Sedmak, Z. Savic
Failure analysis of dissimilar single-lap joints
F.A. Stuparu, D.A. Apostol, D.M. Constantinescu, M. Sandu, S. Sorohan