SI: Computational Mechanics and Mechanics of Materials in Italy
Guest editors:
• Elio Sacco (Università di Cassino e del Lazio Meridionale, Italy)
• Sonia Marfia (Università di Cassino e del Lazio Meridionale, Italy)
A micropolar model for the analysis of dispersive waves in chiral mass-in-mass lattices
A. Bacigalupo, L. Gambarotta
Effective properties of a new auxetic triangular lattice: an analytical approach
L. Cabras, M. Brun
A micromechanical four-phase model to predict the compressive failure surface of cement concrete
A. Caporale, R. Luciano
Elastic wave propagation and stop-band generation in strongly damaged solids
G. Carta, M. Brun, A.B. Movchan
Micromechanical approach for the micropolar modeling of heterogeneous periodic media
M.L. De Bellis, D. Addessi
Numerical homogenization of piezoelectric textiles with electrospun fibers for energy harvesting
C. Maruccio, L. De Lorenzis
Strain gradient elasticity within the symmetric BEM formulation
S. Terravecchia, T. Panzeca, C. Polizzotto
TWSME of a NiTi strip in free bending conditions: experimental and theoretical approach
A. Fortini, M. Merlin, R. Rizzoni, S. Marfia
Response of porous SMA: a micromechanical study
V. Sepe, S. Marfia, F. Auricchio
An ideal model for stress-induced martensitic transformations in shape-memory alloys
Michele Marino
State update algorithm for associative elastic-plastic pressure-insensitive materials by incremental energy minimization
N.A. Nodargi, E. Artioli, F. Caselli, P. Bisegna
Geometric numerical integrators based on the Magnus expansion in bifurcation problems for non-linear elastic solids
A. Castellano, P. Foti, A. Fraddosio, S. Marzano, M. D. Piccioni
An efficient Bouc & Wen approach for seismic analysis of masonry tower
Luca Facchini, Michele Betti
CH of masonry materials via meshless meso-modeling
Giuseppe Giambanco, Emma La Malfa Ribolla, Antonino Spada
Damage propagation in a masonry arch subjected to slow cyclic and dynamic loadings
J. Toti, V. Gattulli, Elio Sacco
A 3D mixed frame element with multi-axial coupling for thin-walled structures with damage
D. Addessi, P. Di Re
Prediction of the pull-out strength of chemical anchors in natural stone
L. Contrafatto, R. Cosenza
Limit analysis on FRP-strengthened RC members
D. De Domenico, A.A. Pisano, P. Fuschi
Damage modelling in concrete subject to sulfate attack
N. Cefis, C. Comi
A finite-element approach for the analysis of pin-bearing failure of composite laminates
Michele Marino, Francesca Nerilli, Giuseppe Vairo
The strong formulation finite element method: stability and accuracy
Francesco Tornabene, Nicholas Fantuzzi, Michele Bacciocchi
A consistency assessment of coupled cohesive zone models for mixed-mode debonding problems
R. Dimitri, M. Trullo, G. Zavarise, L. De Lorenzis
Bond-slip analysis via a cohesive-zone model simulating damage, friction and interlocking
R. Serpier, L. Varricchio, E. Sacco, G. Alfano
A simple beam model to analyse the durability of adhesively bonded tile floorings in presence of shrinkage
S. de Miranda, A. Palermo, F. Ubertini
Flaw-tolerance of nonlocal discrete systems and interpretation according to network theory
A. Infuso, M. Paggi
Crack detection in beam-like structures by nonlinear harmonic identification
Paolo Casini, Fabrizio Vestroni, Oliviero Giannini
A data fusion based approach for damage detection in linear systems
Ernesto Grande, Maura Imbimbo
Integrated structure for a resonant micro-gyroscope and accelerometer
V. Zega, C. Comi, A. Corigliano, C. Valzasina
A numerical framework for simulating fluid-structure interaction phenomena
A. De Rosis, S. de Miranda, C. Burrafato, F. Ubertini
Mixed methods for viscoelastodynamics and topology optimization
Giacomo Maurelli, Nadia Maini, Paolo Venini
Development of biodegradable magnesium alloy stents with coating
Lorenza Petrini, Wei Wu, Dario Gastaldi, Lina Altomare, Silvia Farè, Francesco Migliavacca, Ali Gökhan Demir, Barbara Previtali, Maurizio Vedani