Editor-in-Chief
- Francesco Iacoviello (Università di Cassino e del Lazio Meridionale, Italy)

Co-Editors-in-Chief
- Filippo Berto (Norwegian University of Science and Technology (NTNU), Trondheim, Norway)
- Sabrina Vantadori (University of Parma, Italy)
- Jianying He (Norwegian University of Science and Technology (NTNU), Trondheim, Norway)

Section Editors
- Marco Boniardi (Politecnico di Milano, Dip. di Meccanica, Italy)
- Sara Bagherifard (Politecnico di Milano, Department of Mechanical Engineering, Italy)
- José A.F.O. Correia (Faculty of Engineering, University of Porto, Institute of R&D in Structures and Construction, Portugal)
- Milos Djukic (Department of Engineering Materials and Welding & Welding and Welded Structures, University of Belgrade, Serbia)
- Stavros Kourkoulis (Department of Mechanics, National Technical University of Athens, Greece)
- Liviu Marsavina (University Politehnica Timisoara, Department of Mechanics and Strength of Materials, Romania)
- Pedro Moreira (INEGI, University of Porto, Portugal)
- Guian Qian (Chinese Academy of Sciences, China)
- Aleksandar Sedmak (University of Belgrade, Serbia)

Advisory Editorial Board
- Harm Askes (Department of Civil and Structural Engineering, University of Sheffield, UK)
- Leslie Banks-Sills (The Iby and Aladar Fleischman Faculty of Engineering, Tel Aviv University, Israel)
- Alberto Carpinteri (Dipartimento di Ingegneria Strutturale, Edile e Geotecnica, Politecnico di Torino, Italy)
- Andrea Carpinteri (Dipartimento di Ingegneria e Architettura, Università di Parma, Italy)
- Giuseppe Ferro (Dipartimento di Ingegneria Strutturale, Edile e Geotecnica, Politecnico di Torino, Italy)
- Donato Firrao (Dipartimento di Ingegneria Meccanica e Aerospaziale, Politecnico di Torino, Italy)
- Emmanuel Gdoutos (Department of Civil Engineering, Democritus University of Thrace, Greece )
- Youshi Hong (Institute of Mechanics, Chinese Academy of Sciences, China)
- M. Neil James (Faculty of Science and Technology, Univ. of Plymouth, United Kingdom)
- Gary Marquis (Dept. of Mechanical Engineering, Aalto University, Finland)
- Thierry Palin-Luc (Ecole Nationale Supérieure d'Arts et Métiers | ENSAM · Institute of Mechanics and Mechanical Engineering (I2M) - Bordeaux, France)
- Robert O. Ritchie (Dept. Mechanical Engineering, University of California, Berkeley, USA)
- Ashok Saxena (Dept. Mechanical Engineering, University of Arkansas, Fayetteville, USA)
- Darrell F. Socie (Emeritus, University of Illinois ad Urbana-Champaign)
- Cetin Morris Sonsino (Fraunhofer LBF, Germany)
- Ramesh Talreja (Aerospace Engineering, Texas A&M University, USA)
- David Taylor (Dept. of Mechanical and Manufacturing Engineering, University of Dublin, Ireland)
- Yu Shou-Wen (Department of Engineering Mechanics, Tsinghua University, China)
- John Yates (The Engineering Integrity Society; Sheffield Fracture Mechanics, UK)

Regional Editorial Board
- Nicola Bonora (Università di Cassino e del Lazio Meridionale, Dept. of Civil and Mechanical Engineering, Italy)
- Raj Das (RMIT University, Aerospace and Aviation department, Australia)
- Dorota Kocańda (Military University of Technology, Department of Mechanical Engineering, Poland)
- Stavros Kourkoulis (Department of Mechanics, National Technical University of Athens, Greece)
- Carlo Mapelli (Politecnico di Milano, Dipartimento di Meccanica, Italy)
- Liviu Marsavina (University Politehnica Timisoara, Department of Mechanics and Strength of Materials, Romania)
- Antonio Martin-Meizoso (Department of Materials, Tecnun Universidad de Navarra, Spain)
- Mohammed Hadj Meliani (LPTPM , Hassiba Benbouali University of Chlef. Algeria)
- Raghu Prakash (Department of Mechanical Engineering and Machine Design, Indian Institute of Technology/Madras in Chennai, India)
- Luis Reis (Instituto Superior Técnico, Universidade de Lisboa, Lisbon, Portugal)
- Elio Sacco (Dipartimento di Strutture per l'Ingegneria e l'Architettura, Università di Napoli "Federico II", Italy)
- Aleksandar Sedmak (University of Belgrade, Engineering Materials and Welding, Faculty of Mechanical Engineering, Serbia)
- Dov Sherman (Tel-Aviv University, Department of Materials Science & Engineering, Tel-Aviv, Israel)
- Karel Slámečka (Brno University of Technology, Central European Institute of Technology, Brno, Czech Republic)
- Tuncay Yalcinkaya (Middle East Technical University (METU), Turkey)
- Petro Yasniy (Ternopil National Ivan Puluj Technical University, Ukraine)

Editorial Board
- Jafar Albinmousa (Mechanical Engineering Department, King Fahd University of Petroleum & Minerals, Saudi Arabia)
- Mohammad Azadi (Faculty of Mechanical Engineering, Semnan University, Iran)
- Nagamani Jaya Balila (Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, India)
- Sumit Basu (Department of Mechanical Engineering, Indian Institute of Technology Kanpur, India)
- Stefano Beretta (Dipartimento di Meccanica, Politecnico di Milano, Italy)
- Filippo Berto (Norwegian University of Science and Technology, Department of Mechanical and Industrial Engineering, Norway)
- K. N. Bharath  (GM Institute of Technology, Dept. Of Mechanical Engg., India)
- Elisabeth Bowman (Dept. Civil and Structural Engineering, University of Sheffield, UK)
- Alfonso Fernández-Canteli (Department of Construction and Manufacturing Engineering, University of Oviedo, Spain)
- Luca Collini (Dipartimento di Ingegneria e Architettura, Università di Parma, Italy)
- Antonio Corbo Esposito (Dipartimento di Ingegneria Elettrica e dell'Informazione, Università di Cassino e del Lazio Meridionale, Italy)
- Mauro Corrado (Department of Structural, Geotechnical and Building Engineering, Politecnico di Torino, Italy)
- Dan Mihai Constantinescu (Department of Strength of Materials, University POLITEHNICA of Bucharest, Romania)
- Manuel de Freitas (IDMEC, Instituto Superior Técnico, Portugal)
- Abílio de Jesus (Mechanical Engineering Department, Faculty of Engineering & Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI) University of Porto, Portugal)
- Vittorio Di Cocco (Università di Cassino e del Lazio Meridionale, Dept. of Civil and Mechanical Engineering,Italy)
- Andrei Dumitrescu (Petroleum-Gas University of Ploiesti, Mechanical Engineering Department, Romania)
- Devid Falliano (Dipartimento di Ingegneria Strutturale, Edile e Geotecnica, Politecnico di Torino, Italy)
- Riccardo Fincato (JWRI - Joining and Welding Research Institute, Osaka University, Japan)
- Eugenio Giner (Dpto. de Ingeniería Mecánica y de Materiales, Universitat Politecnica de Valencia, Spain)
- Abdelmoumene Guedri (Department of Mechanical Engineering, Faculty of Science and Technology, Souk Ahras University, Algeria)
- Ercan Gürses (Middle East Technical University, Turkey)
- Abdelkader Hocine (LPTPM , Hassiba Benbouali University of Chlef, Algeria)
- Ali Javili (Bilkent University, Turkey)
- Dimitris Karalekas (University of Piraeus, Department of Industrial Management and Technology, Greece)
- Sergiy Kotrechko (G.V. Kurdyumov Institute for Metal Physics, N.A.S. of Ukraine, Ukraine)
- Grzegorz Lesiuk (Wroclaw University of Science and Technology, Department of Mechanics, Materials Science and Engineering, Wroclaw, Poland)
- Paolo Lonetti (Department of Civil Engineering, University of Calabria, Italy)
- Erica Magagnini (Dipartimento di Ingegneria Civile, Edile e Architettura, Università Politecnica delle Marche, Italy)
- Carmine Maletta (Dipartimento di Ingegneria Meccanica, Energetica e Gestionale, Università della Calabria, Italy)
- Tomasz Machniewicz (AGH University of Science and Technology, Poland)
- Fatima Majid (Laboratory of Nuclear, Atomic, Molecular, Mechanical and Energetic Physics, University Chouaib Doukkali, El jadida, Morocco)
- Sonia Marfia (Università di Cassino e del Lazio Meridionale, Dept. of Civil and Mechanical Engineering, Italy)
- Lucas Filipe Martins da Silva (Departamento de Engenharia Mecânica Faculdade de Engenharia da Universidade do Porto)
- Hisao Matsunaga (Department of Mechanical Engineering ,Kyushu University, Japan)
- Milos Milosevic (Innovation centre of Faculty of Mechanical Engineering in Belgrade, Serbia)
- Mahmoud Mostafavi (University of Bristol, Department of Mechanical Engineering, UK)
- Vasile Nastasescu (Military Technical Academy, Bucharest; Technical Science Academy of Romania, Romania)
-  Stefano Natali ("Sapienza" Università di Roma, DICMA, Italy)
- Andrzej Neimitz (Kielce University of Technology, Poland)
- Hryhoriy Nykyforchyn (Karpenko Physico-Mechanical Institute of the National Academy of Sciences of Ukraine, Ukraine)
- Pavlos Nomikos (National Technical University of Athens, School of Mining and Metallurgical Engineering, Greece)
- Marco Paggi (IMT Institute for Advanced Studies Lucca, Italy)
- Hiralal Patil (Department of Mechanical Engineering at GIDC Degree Engineering College, Abrama-Navsari, Gujarat, India)
- Oleg Plekhov (Perm federal research center Ural Branch Russian Academy of Sciences, Institute of continuous media mechanics Ural Branch Russian Academy of Sciences., Perm, Russian Federation)
- Alessandro Pirondi (Dipartimento di Ingegneria e Architettura, Università di Parma, Italy)
- Zoran Radaković (University of Belgrade, Faculty of Mechanical Engineering, Serbia)
- D. Mallikarjuna Reddy (Department of Design & Automation, School of Mechanical Engineering, Vellore Institute of Technology, Vellore, India)
- Luciana Restuccia (Dipartimento di Ingegneria Strutturale, Edile e Geotecnica, Politecnico di Torino, Italy)
- Giacomo Risitano (University of Messina, Department of Engineering, Messina, Italy)
- Mauro Ricotta (University of Padova, Department of Industrial Engineering, Padova, Italy)
- Roberto Roberti (CoReMet, Italy)
- Pietro Salvini (Dipartimento di Ingegneria dell'Impresa "Mario Lucertini", Università di Roma "Tor Vergata", Italy)
- Hossam El-Din M. Sallam (Civil Engineering Department, Jazan University, Saudi Arabia)
- Mauro Sassu (Department of Civil Environmental Engineering and Architecture, University of Cagliari, Italy)
- Danieal Scorza (Department of Engineering and Architecture, University of Parma, Italy)
- Andrea Spagnoli (Department of Engineering and Architecture, University of Parma, Italy)
- Dariusz Skibicki (UTP University of Science and Technology, Poland)
- Marta Słowik (Lublin University of Technology, Poland)
- Ilias Stavrakas (University of West Attica, Dept. of Electrical and Electronic Engineering, Greece)
- Cihan Tekoğlu(Department of Mechanical Engineering, TOBB University of Economics and Technology, Ankara, Turkey)
- Dimos Triantis (Department of Electrical and Electronic Engineering, University of West Attica, Greece)
- Andrea Tridello (Politecnico di Torino - Department of Mechanical and Aerospace Engineering, Italy)
- Paolo Sebastiano Valvo (Department of Civil and Industrial Engineering, University of Pisa, Italy)
- Natalya D. Vaysfel'd (Odesa National Mechnikov University, Mathematical Physics Methods Department, Odesa,  Ukraine)
- Cristian Vendittozzi (Aerospace and Automotive Engineering, Universidade de Brasilia, Brasil)
- Charles V. White (Emeritus Faculty, Kettering University, Michigan,USA)
- Shun-Peng Zhu (Center for System Reliability & Safety, School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, China)

Guest Editors
Frattura ed Integrità Strutturale publishes 4 issues per year (January, April, July and October). Special issues are published as "Sections" in the "normal" issues. The titles of the special issues published up to now, and the names of the Guest Editors, are available here: LINK.

Journal Secretariat
Francesco Iacoviello
Università di Cassino e del Lazio Meridionale - DiCeM
via G. di Biasio 43, Cassino (FR) Italia
tel/fax +39.07762993681

Publisher
Gruppo Italiano Frattura (IGF)